■ Introduction

Green impression compound stick is a high-viscosity thermoplastic material, primarily used for border molding of impression trays. After being softened by heating, it is placed in the mouth for functional border molding, allowing the tray edges to better adapt to the soft tissues. At the same time, its high viscosity enables accurate recording of the full depth of the gingival sulcus, ensuring complete impression detail. In addition, this product can be used to build up material in edentulous areas after tooth extraction to modify the tray shape, as well as to add lingual extension to the lower stock tray, thereby meeting the needs for custom tray modifications in complex impression cases.

■ Key applications

1.Border molding for impression trays
2.Recording full depth of gingival sulcus
3.Building up edentulous areas to modify tray shape
4.Adding lingual extension

■ Features

1.High viscosity – no flow or deformation
2.Thermoplastic: softens in 50-65°C hot water, sets quickly at room temperature
3.Composite formula – tough, not brittle
4.Can be reheated and reused

■ Instructions for Use
1.Soften the stick in 50-65°C hot water for 10-15 seconds
2.Remove and mold by hand or instrument, place on tray edge or desired area
38.Insert into patient's mouth for functional border molding
4.Remove tray and check border shape; reheat if adjustment is needed
5.Allow to cool and harden before taking impression
6.Storage: Store in a cool, dry place away from heat and direct sunlight.
■ Precautions
1.For professional dental use only
2.Do not exceed 70°C water temperature to avoid over-softening
3.Reseal packaging after use to prevent contamination
4.Storage: Store in a cool, dry place away from heat and direct sunlight.