■ Introduction
The Tooth Dryer is used to dry the tooth surface. 

■ Features

1、Thermovent: Good heat dissipation effect and high speed

2、Health And Safety: 8.1mm diameter stainless steel nozzle,the tubes must be sterilized between treatments by autoclave134°C
3、Fix: Rotating installation allows for switching between multiple types of nozzles

4、INTELLIGENCE:The device will shut down automatically after 3 minutes without operation

5、PRODUCTFEATURES: Charging can be done by plugging in USB

■ Technical parameters  
Battery:1400mAh/3.7 
Input:5V1A
Output:1.8W Max

■ Charging
1) When the light flashes, lightness is not enough or fan shutdown automatic, please stop using the device and recharge
the battery. 
2) Connect the AC adapter with the device properly, and insert the AC USB adapter plug to the power socket. 
3) The red indicator is lighted when the device is charging, it means charging has finished when the red indictor turns green. 

■ Use method
1)Assemble the tube into the body. 
2)Press the button to turn ON/OFF the fan and light. 
3)The device will shutdown automatically after 3 minutes without operation. Disinfection, cleaning and 

sterillization
 1) The main unit must be cleaned, disinfected and srilized before each use to prevent any contamination. This concerns the first use as well as the subsequent uses. 
2) After each use, all the objects that were in contact with infectious agents should be cleaned using towels impregnated with a disinfecting and detergent solution(a bactericidal fungicidal and aldehyde free solution). Use of chemical agents may cause damage to the equipment. 
3) The tubes must be sterilized between treatments by autoclave 134C。 
4) The main unit cannot be autoclaved.