The teeth decorations, modeled on optical principle of diamonds, are a kind of artificial crystal-ornament for dental use only.Its top surface is made from artificial crystal, which metal reflection surface was plated on the button in order to reflect light with dirrerent colors. To make the surface reflect enough brightness.
■ opration process
1,clean teeth area
2, rinse and drying the tooth area
3, embrocate the bonding agent to the surface, after 20 seconds blow it thinner
5, drip one drop of flowing resin on the adhesive area.
6,stick crystal accouterments on the tip of the needle-like structure by wax or plastics
7, some enamal agents need be covered on both the bottom and the edge of dental accounterments by using small brush, then put the dental accouterments on tooth surface by slightly.
8, appropriately adjust the placement of the dental accouterments you have put on. in order to get the best condition please remove the redundant enamel agents and resin with small brush.
9, polymerize with light for 60s.
10, check if it meets the requirements, here, an probe will be used to explore around the dental accouterments.
11, remove the needle-like structure and polish the dental accouterments surface.